Digital Equipment LGplus Series, Руководство по установке

Страница: 43 / 194

2–21
Power on the Printer
Following are instructions for powering on the printer after you have
installed the ribbon and loaded paper.
OFF ON
Cabinet Front Door
Figure 2–17. The Power Switch
1. When you start this procedure, verify that paper and ribbon are installed,
the forms thickness lever is lowered, and the tractor doors are closed.
This prevents a “LOAD PAPER” or “CLOSE PLATEN” error message
from displaying after the printer is powered on.
2. Set the power switch to the ON position (see Figure 2–17). The printer
initializes and runs several self–tests. The messages “TESTING
HARDWARE / PLEASE WAIT” and “DIAGNOSTIC PASSED” will
each display briefly. When the self–tests complete and the software has
initialized successfully, the status lamps light to indicate the printer is
online, and the message “ONLINE / LG” appears on the LCD.
If the status lamps flash and a fault message displays, this indicates a
fault condition; refer to the fault messages section in Chapter 6, Routine
Service and Diagnostics.