Digital Equipment LGplus Series, Руководство по установке

Страница: 103 / 194

4–33
Font Attributes
This submenu allows you to define the following font attributes: typeface,
proportional spacing, bold print, and italic print. You can also specify if the
zero character will print with a slash.
Page Format
Margins
•
The right margin is set in columns; column zero is defined as the far
right edge of the page, and column numbering increments from right to
left.
•
The left margin is also set in columns; however, column zero is defined
as the far left edge of the page, and column numbering increments from
left to right.
•
The bottom margin is defined in lines, starting from line zero at the
bottom of the page.
Perforation Skip
Perforation Skip allows or prevents printing on page perforation. When
enabled, it sets up a total skip–over margin of 1/2”, 2/3”, 5/6”, or 1”. For
example, a skip–over margin of 1” allows a 1/2” margin on each side of the
page perforation. The default is Disable.
Form Length
Forms length is the number of lines that can be printed on a page. You can
set forms length in inches, millimeters (mm), or as a function of the current
LPI (lines per inch).
Form Width
The forms width can be specified in inches, millimeters, or as a function of
the current CPI (characters per inch). The forms width set should not exceed
the actual paper width. For example, when using paper which is 8 1/2 inches
wide, selecting an 8–inch print width prevents printing beyond the right
margin and damaging the hammer tips and platen.