Digital Equipment LGplus Series, Руководство по установке

Страница: 63 / 194

3–15
Saving Your New Configuration
1*
2
3
4
5
6
7
8
CONFIG. CONTROL
Load Config. Save Config. Print Config. Delete Config.
Power–up
Config. Protect
Configs.
* = Factory Default
Once you have changed all of the necessary parameters, it is recommended
you save them as a configuration that can be stored and loaded later for
future use. If you do not save your configuration before you power off the
printer, all of your parameter changes will be erased. The Save Config.
option allows you to save up to eight configurations to meet different print
job requirements. (Configurations 1 to 8 are empty until you save values to
them using the Save Config. option.) For example:
Config 1: Selects DP typeface, 10 cpi, 6 lpi
Config 2: Selects NLQ typeface, 12 cpi, 8 lpi
Once you have saved a custom configuration using this option, it will not be
lost if you power off the printer. You can load a configuration for a specific
print job (see page 3–19). You can also modify and resave it. You may want
to print your configurations and store them in a safe place, such as inside the
printer cabinet (see page 3–17) .
If the Protect Configs. parameter is enabled, and you try to resave an existing
configuration, the new configuration will not be saved until the existing
configuration has been deleted (see page 4–10).
NOTE: If you are going to change and save parameters for both the LG and
the LinePrinter Plus emulations, remember to save your changes for
the LG emulation before you select LinePrinter Plus as the active
emulation (or vice versa). Once you change active emulations, any
changes to the previously selected emulation will be gone unless
they have been saved.