Digital Equipment LGplus Series, Руководство по установке

Страница: 54 / 194

3–6
Changing and Saving Parameter Settings
You may change a printer parameter setting, such as line spacing or forms
length, either by pressing keys on the control panel to configure the printer’s
resident set of configuration menus, or by sending emulation control codes
from a host attached to the printer (the host data stream). Page 3–12 provides
an example procedure for using the control panel to change parameter
settings.
When control codes are sent from a host attached to the printer, they override
control panel settings. For example, if you set the line spacing to 6 lpi with
the control panel, and application software later changes this to 8 lpi with a
control code, the control code overrides the control panel setting.
The parameter settings that you have changed using the menus and control
codes can be permanently stored in the printer’s memory if you save them to
printer memory using the “Save Config.” menu option. If you do not save
your changes, they will be lost when the printer is powered off.
There are no host control codes that allow you to save a parameter as a
custom configuration.