Digital Equipment LGplus Series, Руководство по установке

Страница: 192 / 194

Index–8
Printer installation, distance required from
host, 2–3
Printer Select, 4–23
Printer select parameter, 4–24
Printer settings, changing, 3–2
Printer tests menu, 4–53
Printing direction, 4–48
Printing last line of text, paper out condition,
4–54
Printing speed, graphics and text, 1–11
Printout, generating hex dump, 4–34
Printouts
configuration, 3–17
hex code, 6–9
Proprinter XL emulation menu
20 CPI condensed, 4–22
auto LF, 4–21
define CR code, 4–20
define LF code, 4–21
FF valid at TOF, 4–22
Protect Configs., 4–10
PROTECTED INSTR *, 6–16
Protocol, serial interface, 4–39
Protocols
overview definition, 1–8
RS–232 serial interface, 5–17
RS–422 serial interface, 5–17
R
RAM, displaying, 4–54
Ready signal, Dataproducts parallel interface,
5–4
Received data (RD) signal
RS–232 serial interface, 5–16
RS–422 serial interface, 5–17
Request to send (RTS) signal, RS–232 serial
interface, 5–16
Request to Send parameter, 4–41
Requirements, printer, power, 2–2
Resistors
configuration, 5–13
installation, 5–14
removal, 5–14
Response Polarity parameter, Centronics
(parallel) submenu, 4–43
RIB INVLD CMD *, 6–16
RIB INVLD STATE *, 6–16
Ribbon, specifications, A–2
RIBBON DRIVE, 6–16
Ribbon, installing, 2–14
RS–232 serial interface
clear to send (CTS), 5–16
configuration, 5–18
data carrier detect (DCD), 5–16
data set ready (DSR), 5–16
error handling, 5–17
framing error handling, 5–17
overrun error handling, 5–17
parity error handling, 5–17
pin assignments, 5–15
protocol, 5–17
request to send (RTS), 5–16
X–ON/X–OFF signal, 5–17
RS–232 serial interface signals, 5–16
data terminal ready (DTR), 5–16
received data (RD), 5–16
transmitted data (TD), 5–16
RS–422 serial interface
configuration, 5–18
error handling, 5–17
framing error handling, 5–17
overrun error handling, 5–17
parity error handling, 5–17