Digital Equipment DECmpp 12000/Sx 100, Руководство по обслуживанию оборудования

Страница: 107 / 156

pe_macro(1)
SRC Destination Message Reference
fflag Each flag bit #61–#80
rflag
Each flag bit #81–#100
64[c0]
Each flag bit #101–#120
After each move, it checks that lflag is set properly. After moving into all of
the flag bits, it checks that each was set properly.
•
MoveTests4c
: MOV1 Clear Flag Bits Test (part 1) — This is a test of the
MOV1 instruction. It uses the following bits as operands:
lsb
lflag
cflag
vflag
zflag
nflag
tflag
fflag
rflag
64[c0]
It successively moves a 0 from the source into each of the flag bits in the list
shown above.
SRC Destination Message Reference
lsb Each flag bit #1–#20
lflag Each flag bit #21–#40
cflag Each flag bit #41–#60
vflag Each flag bit #61–#80
zflag Each flag bit #81–#100
nflag Each flag bit #101–#120
After each move, it checks that lflag is cleared properly. After moving into all
of the flag bits, it checks that each was cleared properly.
The remainder of this test is continued in MoveTests4d.ma.
• MoveTests4d : MOV1 Clear Flag Bits Test (part 2) — This is a test of the
MOV1 instruction. It uses the following bits as operands:
lsb
lflag
cflag
vflag
zflag
nflag
tflag
fflag
rflag
64[c0]
Data Parallel Unit Reference Pages B–23