Digiop D3D-2500, Руководство пользователя

Страница: 53 / 124

45 DIGIOP® 3D Camera User Manual
SECTION 5: CONFIGURE COUNTING LINES
two zones, one that contains enter and exit lines for the store, and one that contains a pass line perpendicular to the count lines for
counting people who pass by the store.
NOTE
Each zone can function as either an Enter/Exit zone or a Pass zone. You can not have a pass line in the same zone as Enter
and Exit lines. Note: Up to six zones (queuing, service, counting, or detection) can be added to each DIGIOP® 3D camera.
All zones function independently of one another. For example, if a device covers two separate doors, you can create one zone for
door 1 and one zone for door 2. You will then click on the name for zone 1 and draw counting lines, then click on zone 2 and draw
the counting lines for that zone. The device will report separate enter and exit counts for each door.
If you want to obtain the sum of enters and exits for both doors, you can create a single zone and draw a set of enter and exit lines
for door one and a set of enter and exit lines for door two. Since both sets of lines are part of the same zone, the device will sum all
entrances through door one and door two into a single “Enter” count. The same is true with “Exit” counts.
5.9 Naming Reporting Zones
When you configure the DIGIOP® 3D camera, you should also give the report zone a descriptive name so that you know what area
is being monitored. For example, if you have two devices counting entrances at the front and back doors you may want to name
the zone tracking entrances through the front door “Front Door Entrances” and the zone counting entrances through the back door
“Back Door Entrances.” Complete the following steps to name a reporting zone:
1. Access the configuration application from your web browser.
2. Click the Counting tab. The Counting page appears.
3. Double-click the
Name
field of the zone you want to rename in the zone list toward the bottom of the page.
4. Type a new zone name.
5. Click
Save
.
5.10 Drawing Enter, Exit, and Exclusion lines
Use the following guidelines when creating enter and exit lines:
•
Do not place lines on or near the edge of the image space shown on the screen. The DIGIOP® 3D camera must track a person for
a minimum distance before it can count them.
•
Lines should be drawn on the floor based on a customer’s foot position.
•
Lines should be positioned such that the DIGIOP® 3D camera sees the entire person (top of the head).
•
Place the enter line at the point where you consider an individual to have entered the location.