Digiop D3D-2500, Руководство пользователя

Страница: 55 / 124

47 DIGIOP® 3D Camera User Manual
SECTION 5: CONFIGURE COUNTING LINES
4. Select New from the pop-up menu. A new zone appears and the zone name is active for editing.
Zone List box with New Zone
5. Type the name for the new zone in the Name field.
Zone List box with New Zone renamed
6. (Optional) If you need to map zones back to specific IDs within your company, click the
External ID
field and type the ID for
the zone. This ID will be sent with the XML packet so that you can map the count data based on your specific needs.
7. Click the
Enter
button in the button bar and draw an enter line on the left image.
WARNING
!
The DIGIOP® 3D camera has a Minimum Track Distance setting that requires the total track distance to be at least 90 cm
(~36 in) for them to be counted by any counting lines. This allows the camera to prevent short tracks from being counted.
Tracks must move at least 90 cm in total distance, not 90 cm prior to crossing a count line.
DIGIOP® recommends this setting remain at 90 cm for all applications. For information on changing this setting refer to the
Advance Options section of this manual.