Digi ConnectPort X Series, Руководство пользователя

Страница: 219 / 247

Configure and manage the device using the Digi ConnectPort X Family
command line interface Management through the command
line interface
Digi ConnectPort X Family 219
n
set realport
n
set rtstoggle
n
set serial
n
set service
n
set snmp
n
set system
n
set tcpserial
n
set user
n
set wimax
n
set wlan
n
set xbee
Use the following commands to manage XBee networks and nodes:
n
display mesh
n
info zigbee_sockets
n
set mesh
n
xbee
close
Use the close command to close active sessions that were opened by connect , rlogin , and telnet
commands.
connect
Use the connect command to establish a connection with a serial port.
dhcp
The dhcp command manages DHCP server operation.
display
Use the display commands to display real-time information about a device, such as:
n
General product information, including the product name, MAC address, boot, post, and
firmware versions, memory usage, utilization, and uptime, or the amount of time since the
device was booted ( display device ).
n
Active interfaces on the system. These include the web interface, command line interface,
Point-to-Point Protocol (PPP), and Ethernet interface, and their status, such as Closed or
Connected ( display netdevice ).
n
Logged serial data ( display logging/ ).
n
Memory usage information ( display memory ).
n
Serial modem signals ( display serial ).