Digi ConnectPort X Series Скачать руководство пользователя страница 79

Страница: 79 / 247

Configure the device using the Digi ConnectPort X Family web interface

Configuration through the web interface

Digi ConnectPort X Family

Remote Endpoint

: Type the IP address and subnet mask of the remote network. Both the Digi

device and the remote VPN device must be configured to use the same values.

Tunnel Network Traffic to the following Remote Network

IP Address

: Type the IP address of the remote network.

Subnet Mask

: Type the subnet mask of the remote network.

Digi devices support a mode of VPN tunnel operation called

VPN tunnel all mode

, where all

traffic that is not directed to the local subnet is sent across a VPN tunnel to a remote

network. This mode is different from the normal mode of VPN tunnel operation, where the

range of the remote subnet is explicitly set VPN tunnel all mode is supported when the Digi

device is the initiator of the VPN connection. It is not supported when the Digi device is the

server.

For example, in the normal mode of operation, a user might set up a VPN tunnel between

the local subnet at 192.168.1.0/24 to a remote subnet at 172.16.1.0/24. In this case, the

remote subnet range is the subnet at 172.16.1.x. In VPN tunnel all mode, the remote

subnet is any address that is not on the local subnet, or in this case, anything not in the

subnet 192.16.1.x.

The local subnet must be defined as a specific range, for example 192.168.1.0/24. This is

specified in the VPN settings by setting the IP address of the local subnet to 192.168.1.0,

and the subnet mask to 255.255.255.0. VPN tunnel all mode is specified by setting the

remote IP address to 0.0.0.0, and the remote subnet mask to 0.0.0.0.

With the configuration described above, any frames sent from the 192.168.1.x network to

any IP address not in the 192.168.1.x subnet will be set over the VPN tunnel to the remote

subnet.

When configuring a Digi device for VPN tunnel all mode and the device allows for setting the

gateway priority, set the gateway priority. The gateway priority is set on the

Configuration > Network > Advanced Network Settings

page in the

Gateway Priority

setting. Set the gateway priority to

Ethernet

for Ethernet-enabled Digi devices, or

WiFi

for

a wireless Digi devices. If the Digi device’s IP address on the Ethernet (or wireless)

interface is statically configured, specify the address for the gateway on that interface. The

gateway address is set in the

Configuration > Network > Ethernet IP Settings

page.

Содержание ConnectPort X Series
























































































































































































































































Результаты поиска

Содержание ConnectPort X Series

Отзывы:

Бренды по названию

Популярные бренды

Digi ConnectPort X Series, Руководство пользователя

Результаты поиска

Содержание ConnectPort X Series

Отзывы:

Бренды по названию

Популярные бренды