Digi ConnectPort X Series Скачать руководство пользователя страница 106

Страница: 106 / 247

Configure the device using the Digi ConnectPort X Family web interface

Configuration through the web interface

Digi ConnectPort X Family

106

Short Message Service (SMS) settings

The following options configure the cellular Short Message Service (SMS) capabilities of the mobile
module of the Digi device.

Important Notes:

To determine whether the cellular modem in a Digi device supports SMS, telnet to the

command line and type the

show smscell

command. If an error message is returned (

error:

show option not found

), then SMS is not supported for that Digi device.

SMS is a feature that may be available as part of your mobile service agreement. However,

sending and receiving short messages (or “text messages”) may have additional costs. Before

using the SMS capabilities of your Digi device, verify with your mobile service provider that your

agreement includes SMS as part of your service plan. Understand the costs of SMS before you

enable the SMS features on this Digi device.

Please read

Supported character set

You can configure Digi devices to be managed by Remote Manager via SMS commands. These

configuration settings are on the

Configuration > Remote Manager > Remote Manager SMS

Settings

page and described in

Short Messaging/Remote Manager SMS settings

. This Remote

Manager SMS functionality must be enabled through the Global SMS settings, described below.

Global SMS settings

Enable cellular Short Message Service (SMS) capabilities

: Enable SMS features on this Digi

device. When this option is enabled, the remaining SMS options may be configured. This option

is disabled (off) by default.

Send ACK reply via SMS when command is accepted

: When a command message is

received via SMS, send an acknowledgment (ACK) message via SMS to the originator of the

command message, indicating that the command has been accepted and will be processed.

This option is disabled (off) by default.

Send NAK reply via SMS if password validation fails

: When a command message is received

via SMS, and a required password is either missing or incorrect, send a negative

acknowledgment (NAK) message via SMS to the originator of the command message,

indicating that the command has been rejected due to password validation failure. This option

is disabled (off) by default.

Global SMS Command Password

: When a command message is received via SMS, and a global

password is specified in these settings, that password must be provided by the originator of

the command message or the message will be rejected by the Digi device. If a command-

specific password is configured, that command-specific password must be provided instead of

this global command password. Specifically, a command-specific password overrides the global

password, and the global password is not considered if a command-specific password is

configured in the settings. This option is disabled (no global password required) by default. To

remove the password, simply clear the password field on the settings page.

Содержание ConnectPort X Series
























































































































































































































































Результаты поиска

Содержание ConnectPort X Series

Отзывы:

Бренды по названию

Популярные бренды

Digi ConnectPort X Series, Руководство пользователя

Результаты поиска

Содержание ConnectPort X Series

Отзывы:

Бренды по названию

Популярные бренды