Configure the device using the Digi ConnectPort X Family web interface
Configuration through the web interface
Digi ConnectPort X Family
144
Character
Key
Sequence
backspace
\b
formfeed
\f
tab
\t
line feed
\n
return
\r
backslash
\\
hexadecimal
values
\xhh
Display current serial port settings
To display the current serial port settings for a Digi device, type
display techsupport
from the
command line interface.
Camera
Digi ConnectPort X products support connecting a WatchPort® Camera to one of its USB host ports.
One Digi WatchPort V2 USB camera is supported.
Camera settings
Use the following settings to configure the camera operation and handling of images captured by the
camera.
n
Enable Camera
Enables and disables camera. When disabled, all camera activity stops and all
used memory is freed.
n
Resolution
: The resolution level for images.
n
Frame Delay
: The minimum time between frames in milliseconds. The actual delay time
between frames will be this number or greater. The camera automatically increases this value
as needed, such as in low light conditions. This delay time is the inverse of frames per second.
For instance, if you want to set the camera to process at a maximum of 5 frames per second,
the frame delay is set to 200 (1/5 = 0.2 second = 200 ms).
n
Quality
: Image quality. Choose a quality from 0 to 100; with 0 being the lowest quality and
smallest image size and 100 being the best image quality and largest image size. Digi
recommends a quality range from 30 to 80. Quality above 80 results in larger images, which
result in lower overall performance and increased memory use.
