Configure the device using the Digi ConnectPort X Family web interface
Configuration through the web interface
Digi ConnectPort X Family
119
Basic and advanced settings
The
Basic Settings
control basic operation of the XBee module in an XBee network.
Advanced radio
settings
control behavior of the XBee module at a more detailed level. Generally, you can use the
default settings. For complete settings and their descriptions, see the Product Manual for the XBee or
XBee-PRO RF module in your product. You can view and change configuration settings as needed. To
apply configuration changes, click
Apply
.
CAUTION!
Changing the PAN ID may make the XBee module inaccessible from the rest
of the XBee network.
If you assign a Node Identifier, go to
Configuration
>
XBee Network
and click
Refresh
to view the Node Identifier. The new name appears in the
Node Identifier
field.
Device Status
The
Device Status
page displays status information for a node. The parameters displayed vary based
on the capabilities supported by the node's XBee module. Common parameters include the PAN ID,
firmware and hardware versions, and the device type identifier. The following example shows the
Device Status page. See the user guide for the XBee or XBee-PRO RF module in your product for
parameter descriptions.
