Configure and manage the device using the Digi ConnectPort X Family
command line interface
Management through the command
line interface
Digi ConnectPort X Family
220
n
Mobile connection information and statistics (
display mobile
).
n
Network Address Translation (NAT) information (
display nat
).
n
General status of the sockets resource (
display sockets
).
n
Active TCP sessions and active TCP listeners (
display tcp
).
n
Current UDP listeners (
display udp
).
n
Point-to-Point Protocol (PPP) information, including results of Link Integrity Monitoring tests
by Digi SureLink (
display pppstats
).
n
Provisioning information currently in the Digi device device’s CDMA module (
display
provisioning
).
n
Uptime information (
display uptime
).
n
Virtual Private Network (VPN) connection information (
display vpn
).
display mesh
Use the
display mesh
command to refresh the display of XBee network devices, and displays specific
information about XBee network devices. Displayed information includes the node address and ID list,
as well as individual node status.
display mobile (cellular)
Use the
display mobile
command to display mobile (cellular) statistics.
display provisioning
Use the
display provisioning
command to provision CDMA cellular modules.
display wimax
Use the
display wimax
command to display Wi-MAX information and statistics.
exit and quit
Use the
exit
and
quit
commands to terminate a currently active session.
info
Use the
info
commands to display statistical information about a device over time. The statistics
displayed are those gathered since the tables containing the statistics were last cleared. The type of
statistics include:
n
Device statistics. The
info device
command displays such details as product, MAC address,
boot, POST, and firmware versions, memory usage, utilization, and uptime.
