Specifications and certifications
Europe
Digi ConnectPort X Family
238
The CE mark shall consist of the initials “CE” taking the following form:
n
If the CE marking is reduced or enlarged, the proportions given in the above graduated
drawing must be respected.
n
The CE marking must have a height of at least 5mm except where this is not possible on
account of the nature of the apparatus.
n
The CE marking must be affixed visibly, legibly, and indelibly.
Declaration of Conformity (DoC)
Digi has issued Declarations of Conformity for the Digi ConnectPort X concerning emissions, EMC, and
safety. For more information, see
www.digi.com/resources/certifications
.
Important note
Digi customers assume full responsibility for learning and meeting the required guidelines for each
country in their distribution market. Refer to the radio regulatory agency in the desired countries of
operation for more information.
Maximum power and frequency specifications
ConnectPort X2 - XBee (802.15.4)
Maximum power
Frequencies
11.16 mW
5 MHz channel spacing, beginning at 2405 MHz and ending at 2480 MHz.
ConnectPort X2 - XBee (Zigbee)
Maximum power
Frequencies
6.3 mW
5 MHz channel spacing, beginning at 2405 MHz and ending at 2480 MHz.
