DG Flugzeugbau DG-800A, Руководство по обслуживанию, Страница: 99 / 163

Maintenance Manual DG-808C
Issued: June 2005 4.38
Calibration of the primer
PRIMER DOSE: % of the max. amount of fuel injected by the primer,
max. 99% - standard value 99%.
(With 0°CHT. the adjusted amount of fuel will be injected. The amount of
fuel will be reduced linearly to 0 at 40° CHT).
PRIMER DURATION: Post starting injection of the primer, max. 99% of
the time programmed in the control unit (40 seconds), standard value 99%
Activation or deactivation of the electrical propeller brake (Option)
PROP BRAKE: Activation of the electrical propeller brake (Option), Push
the selector knob, N will be displayed, rotate the selector knob, Y will be
displayed, the propeller brake is activated. Rotate the selector knob N will
be displayed, the propeller brake is deactivated. Push the selector knob to
save this adjustment.
Note: If no electrical propeller brake is installed this function must be
deactivated, otherwise failure messages will be displayed.
Activation or deactivation of the low temperature warning
FREEZE WARNING: Activation or deactivation of the warning message.
Adjustment similar to Prop Brake.
Note: You may deactivate this warning in case no watertanks are installed.
When deactivated the OAT screen will still blink at low temperatures.
Activation or deactivation of the acoustic warning signals
JOINT WARNING OUTP: Activation or deactivation of the signals to
draw the pilots attention to the messages. Adjustment similar to Prop
Brake.
Note: The signal for the stall warning can’t be deactivated.
Download of flight log and service data
FLIGHTLOG

PC: Push the selector knob, N (no) will be displayed,
rotate the selector knob Y (yes) will be displayed, push the selector knob to
reset start the download of the recorded data. The PC must be connected to
the serial interface (socket close to the radio).
Download instruction can be found in the amendment to this maintenance
manual.
Resetting the time until the next 25 hour maintenance
RESET MAINT. TIMER: Push the selector knob, N (no) will be displayed,
rotate the selector knob Y (yes) will be displayed, push the selector knob to
reset the time to the service-interval (25 hours).
Push the selector knob until the DEI-NT beeps twice for 2 times to return
to the flight screen.