DG Flugzeugbau DG-800A, Руководство по обслуживанию, Страница: 90 / 163

Maintenance Manual DG-808C
Issued: May 2012 TN 800/41 4.29
15.
Removal of the propeller brake: Unscrew the propeller brake fixing plate
from the engine‘s rear side by removing three bolts with a 6 mm Allen
key wrench.
16. Close the opening of the exhaust manifold with tape and seal the airfilter
with a plastic bag or similar.
Removal of further attachments (don’t execute for shipping the engine for
repair or overhaul) :
17. Spark plugs: Unscrew spark plugs with an 21 mm (13/16’’) socket
wrench. Seal the cylinder holes with tape.
18. Exhaust manifold: The exhaust manifold can be removed by unscrewing
the four bolts at the cylinder outlet with a 6mm Allen key wrench.
For the lower bolts a shortened wrench is needed see section 7 item U.
Seal the cylinder outlets with tape.
19. Air intake filter: To remove the air intake filter from the carburettor
loosen the clamp at the carburettor with a small screwdriver. Seal the
carburettor intake with tape.
20. Remove both coolant inlets using a 3 mm Allen key wrench. Seal
openings with tape.