DG Flugzeugbau DG-800A, Руководство по обслуживанию, Страница: 154 / 163

Enclosure 1 for maintenance manual
Issued: June 2005 page 3 from 3
control unit over temperature warning (Y/N)
Failure messages:
Extension-retraction unit fuse blown (Y/N)
Switch error warning (Y/N)
Generator failure (Y/N)
Primer failure (Y/N)
Propeller brake failure (Y/N)
Water pump failure (Y/N)
Refuelling pump failure (Y/N)
Fuel pump failure (Y/N)
Verifying the messages:
Engine speed limit exceeded acknowledge (Y/N)
Engine overheating acknowledge (Y/N)
EGT over temperature acknowledge (Y/N)
Low temperature warning acknowledge (Y/N)
Low voltage warning acknowledge (Y/N)
Over voltage warning acknowledge (Y/N)
Fuel reserve warning acknowledge (Y/N)
Airbrake warning acknowledge (Y/N)
Gear warning acknowledge (Y/N)
Fuel gauge failure acknowledge (Y/N)
CHT – sensor failure warning acknowledge (Y/N)
EGT – sensor failure warning acknowledge (Y/N)
OAT – sensor failure warning acknowledge (Y/N)
Communication failure with control unit acknowledge (Y/N)
Proximity switch failure acknowledge (Y/N)
Control unit over temperature warning acknowledge (Y/N)
Ext.-retr.-unit fuse failure acknowledge (Y/N)
Switch error warning acknowledge (Y/N)
Generator failure acknowledge (Y/N)
Primer failure acknowledge (Y/N)
Propeller brake failure acknowledge (Y/N)
Water pump failure acknowledge (Y/N)
Refuelling pump failure acknowledge (Y/N)
Fuel pump failure acknowledge (Y/N)
Notes:
Warnings and failures which have been verified within 1 second by the
pilot are not indicated with Y under messages, but are only indicated with
Y under acknowledges.
In the logfile you will find entries for hardware components which may
not be installed in your glider. Ignore the entries in these columns.
Ignore entries in lines without flight duration or engine operating time.