DG Flugzeugbau DG-800A, Руководство по обслуживанию, Страница: 44 / 163

Maintenance Manual DG-808C
Issued: July 2017 TN800/45 2.1
2 Inspections
2.1 Daily inspection
see flight manual section 4.3
2.2 Regular inspections
A Annual inspection

Execute all items of the daily inspection see flight manual section 4.3.

Check the rudder cables for wear especially around the S tubes on the
rudder pedals. Worn rudder cables should be replaced (see section 4.2.

Check the sealings of the rudder (see section 1.3.5.

Inspect all bolted connections and locking devices ie. locknuts, split pins
etc.

Check all metal parts for adequate greasing and rust prevention. (see section
3.3).

Check the control surface deflections (see sections 1.2 up 1.4).

Check the free play in all control circuits (see section 1.2up to 1.6)

Check the fore and aft play of the wings (see section 1.10).

Check the canopy emergency releases according to section 7.16 of the flight
manual.

Only version Classic: Check the tension of the lines of the waterbag
attachment (see section 4.1).

Landing gear: Check if the bolted connection between actuating lever and
rear upper fork is tightened?

Check all accessible drain and ventilation holes if clogged, especially on the
lower fuselage side (see diagram 17).

Check the fin ballast tank system according to section 1.8.3

Check if the powerplant has been serviced according to section 3.5.1.

Check the friction brake of the throttle control (see sect. 1.11.8).
Check the torque of the propeller bolts see sect. 3.5.1 item 26 of this manual.

Tow hooks: The operating and maintenance instructions for the release
mechanisms, see sect. 0.4 of this maintenance manual have to be followed.

All-up weight and centre of gravity: These should be checked at least
every 4 years during the annual inspection.