DG Flugzeugbau DG-800A, Руководство по обслуживанию, Страница: 16 / 163

Maintenance Manual DG-808C
Issued: May 2012 TN800/41 1.3
1.2.3 Elevator stops
The elevator stops are located at the base of the control column and can be
adjusted with a 10 mm open ended spanner.
1.2.4 Elevator control circuit free play
With the elevator held fixed at the 0 point, the free play at the top of the control
column can be +1.5 mm (+0.06 in.). Within the automatic elevator connection
there should be no free play noticeable when the elevator is moved at its trailing
edge.
Any free play can be reduced by screwing in the adjustment screw on the
automatic connector funnel
.
1.2.5 Trim
The automatic trim mechanism should be adjusted according to the sketch
below. The measurements a and b are with the control stick in forward position:
a = 30 mm (1.18 in.),
b = 187 mm (7.36 in.), c = 357 mm (14.1 in.).
The bungee interconnection between wing flap lever 6St9 and trim lever 2St32
is to be replaced, when worn or when elongated. The length in unstretched
condition y must be 110 mm (4.3 in.). The interconnection consists of 2 mm
diameter. bungee wound around 3 times.
locking nut
adjustment screw
elevator
y
6St9
2St32
2St32
a b
c
bulkhead