DG Flugzeugbau DG-800A, Руководство по обслуживанию, Страница: 15 / 163

Maintenance Manual DG-808C
Issued: June 2005 1.2
1.2 Elevator control and trim system
1.2.1 Control system
see diagram 1
1.2.2 Elevator deflections and tolerances
up: 46 + 2 mm 1.81 + 0.08 in.
down: 46 + 2 mm 1.81 + 0.08 in.
measured at 134 mm (5.3 in.) from hinge axis which is directly at the edge
of the cut-out for the rudder.
Measurement:
Hold a measuring stick with one end on the floor. Deflect the elevator to neutral
position by bringing the mark at the sealing in line with the upper end of the fin.
Mark the 0-point on the stick. Then mark the up and down displacement.
measuring stick one end on the floor
46

2 mm
46

2 mm
sealing
mark