DG Flugzeugbau DG-800A, Руководство по обслуживанию, Страница: 105 / 163

Maintenance Manual DG-808C
Issued: June 2005 7.1
7 List of special tools
A Special 13 mm wrench for front tailplane mounting screw (supplied
with the glider) (W 35).
B Pin 6 mm diameter with handle for wing tip mounting (W 36) (only with
option wing parting)
C Open end spanners
mm mm mm mm
7 10 17 30
8 13 19
9 14 22
D Allen key wrench: 5 mm, 6 mm, 8mm, 10mm, 12mm
E Wrenches for slotted nuts (hook spanner) according to drawing W 51
(encl.) (for the bearings of the upper drive belt pulley)
F Two steel rods dia. 4 mm (5/32 in.) appr. 70 mm (3 in.) long (aileron
control stops)
G Spring balance max. reading 50 N (11 lbs.)
H Nicopress tool 64 – CGMP
I Hose connector TS 16 (to drain coolant) (supplied with aircraft service
set)
J Torque wrench
Torque range 0 - 150 Nm (o - 110 ft lb) with socket wrench 19 mm (for
assembly of the drive belt pulley and the magneto housing of the engine)
K Torque wrench
Torque range 0 - 50 Nm (0 - 370 ft lb) with socket wrenches 10, 13, 17, 19 mm and
21 mm (13/16 in.) for sparkplugs and Allen key inserts 3, 4, 5, 10 mm
L SOLO engine tool set incl. puller assembly for magneto housing