DEMA CPM 310 G, Руководство пользователя

Страница: 65 / 225

- 65 -
Settings Group Selection Menu
Settings Group Selection Menu is accessed via S3
button on the main screen, which will either be titled as
“G1 (Settings Group 1)” or “G2 (Settings Group 2)”
depending on the actual configuration.
“G1” abbreviation shows that CPM 310 G is operating
under no.1 group of settings and “G2” abbreviation
shows that CPM 310 G is operating under no.2 group of
settings.
Settings Group Selection Menu provides easy and rapid
transition possibility between groups of settings. This
functionality makes it possible to change the settings of
CPM 310 G relays to a preloaded configuration rapidly
under critical conditions, e.g. in case of need to alter
the supply direction of a ring network because of a
permanent failure on one of the sides of the line.
The picture to the left shows the Settings Group
Selection Menu. Access to the menu from the main
screen is actually achieved via a shortcut; the menu
can alternatively be accessed by going through the
Main Menu to System Settings Menu, and then to the
Active Group option.
Menu » System Settings » Active Group
When the settings group is needed to be changed,
simply press S3 button while at the main screen (top
picture), and then, at the upcoming menu (bottom
picture) press S5 (Enter) to activate selection option,
utilize S1 (

) or S2 (

) buttons to alternate settings
group and finally apply the new settings group by
pressing S5 (Apply). □
Main Screen » G1 or G2