Delta REG2000 Series, Руководство пользователя

Страница: 86 / 128

07 Descriptions of Parameter Settings | REG2000
7-3
3: ocn over-current during regeneration
6: ocs over-current at stop
9: ovn over-voltage during regeneration
10: ovs over-voltage at stop
15: OrP phase loss in output
16: oH1 power module overheated
17: oH2 internal ambient temperature overheated (air outlet)
18: tHo1 power module overheated protection circuit error
19: tHo2 internal ambient temperature overheated protection circuit error
21: oL overload
30: cF1 memory writing error
31: cF2 memory read error
37: Hd1 current detection error when powering on
38: Hd2 voltage detection error when powering on
42: 5VF 5V control board error (firmware v.1.02 (included) and later)
43: RYF relay error (firmware v.1.02 (included) and later)
49: EF external signal input fault
52: Pcod wrong password
54: cE1 communication error
55: cE2 communication error
56: cE3 communication error
57: cE4 communication error
58: cE10 communication time-out
66: PLE phase lock error

PLE and OrP errors are recorded as errors only in power regeneration status; otherwise, they are warnings in
Ready and Run status.

OH1 Level
Model Default Model Default
REG075A23A 100 REG075A43A 100
REG110A23A 110 REG110A43A 105
REG150A23A 100 REG150A43A 110
REG185A23A 100 REG185A43A 100
REG220A23A 100 REG220A43A 90
REG300A23A 95 REG300A43A 90
REG370A23A 105 REG370A43A 95
REG450A43A 115
REG550A43A 115
Low word in electricity bill
High word in electricity bill
Default: ###
Settings Read only
 When Pr.03-12 =1, Pr.00-26 and Pr.00-27 are reset to 0 and Pr.03-12 returns to 0.
 Display the dollar amount saved on electricity expense. The settings of the related parameters are
shown below.
The kW/hr regenerated (Pr.00-09–Pr.00-10) * electricity expense (Pr.03-13).
It displays by Pr.00-27 * 1000 + Pr.00-26.
Display input AC voltage (V
AC
)
Default: ##.#
Settings Read only