Delta REG2000 Series, Руководство пользователя

Страница: 59 / 128

05 Optional Accessories | REG2000
5-13
 Frame B
 Frame C
Model Name
Main Circuit Terminals
R/L1
、
S/L2
、
T/L3
Grounding Terminal
Stripping
Length
(mm)
Max.
Wire
Gauge
Min. Wire
Gauge
Screw Spec.
and Torque
(±10%)
Stripping
Length
(mm)
Max. Wire
Gauge
Min. Wire
Gauge
Screw Spec.
and Torque
(±10%)
RG-EF200A2
13~15
25 mm
2
[4 AWG]
25 mm
2
[4 AWG]
30.59 kg-cm
[26.55 lb-in.]
[3.0 Nm]
13~15
25 mm
2
[4 AWG]
16 mm
2
[6 AWG]
30.59 kg-cm
[26.55 lb-in.]
[3.0 Nm] RG-EF300A4
1. Tighten the wiring with a slotted screwdriver: Specification of the slotted screwdriver: the width of the blade
should be 5.5mm and the thickness of the blade should be 1.0mm.
2. When wiring bare wires, ensure that they are perfectly arranged to go through the wiring holes.
3. If you install at Ta 40°C environment, use copper wires that have a voltage rating of 600V and are temperature
resistance to 75°C or 90°C.
4. If you install at Ta 40°C above environment, use copper wires that have a voltage rating of 600V and are
temperature resistance to 90°C or above.
5. To be UL installation compliant, you must use copper wires when installing. The wire gauge is based on
temperature resistance of 75°C, in accordance with UL requirements and recommendations. Do not reduce the
wire gauge when using high-temperature resistant wire
Model Name
Main Circuit Terminals
R/L1
、
S/L2
、
T/L3
Grounding Terminal
Stripping
Length
(mm)
Max. Wire
Gauge
Min. Wire
Gauge
Screw Spec.
and Torque
(±10%))
Stripping
Length(mm)
Max. Wire
Gauge
Min. Wire
Gauge
Screw Spec.
and Torque
(±10%))
RG-EF370A2
16~18
50 mm 2
[1/0 AWG]
50 mm 2
[1/0 AWG]
61.18 kg-cm
[53.10 lb-in.]
[6.0 Nm]
16~18
50 mm 2
[1/0 AWG]
25 mm 2
[4 AWG]
61.18 kg-cm
[53.10 lb-in.]
[6.0 Nm]
RG-EF550A4
35 mm 2
[2 AWG]
35 mm 2
[2 AWG]
16 mm 2
[6 AWG]
1. Tighten the wiring with a slotted screwdriver: Specification of the slotted screwdriver: the width of the blade should be 5.5mm
and the thickness of the blade should be 1.0mm.
2. When wiring bare wires, ensure that they are perfectly arranged to go through the wiring holes.
3. If you install at Ta 40°C environment, use copper wires that have a voltage rating of 600V and are temperature resistance to
75°C or 90°C.
4. If you install at Ta 40°C above environment, use copper wires that have a voltage rating of 600V and are temperature
resistance to 90°C or above.
5. To be UL installation compliant, you must use copper wires when installing. The wire gauge is based on temperature
resistance of 75°C, in accordance with UL requirements and recommendations. Do not reduce the wire gauge when using
high-temperature resistant wire