Delta REG2000 Series, Руководство пользователя

Страница: 93 / 128

07 Descriptions of Parameter Settings | REG2000
10
(MI1–5) to malfunction (except counting inputs). This parameter significantly improves these
situations, but response time is slightly delayed.

Digital Input direction
Default: 0
Settings 0–65535
 Sets the activation level for input signals, and has no relation to the terminal’s SINK/SOURCE
status.
 bits 0–4 correspond to MI1–MI5, respectively.
 Enter corresponding values through communications to alter the ON/OFF status of the terminals.

Multi-function output 1 (Relay 1)
Default:4

Multi-function output 2 (MO1)
Default:3

Multi-function output 3 (MO2)
Default: 0
Settings
0: No function
1: Regenerate indicator
2: Run indicator
3: Ready indicator
4: Error indicator
5: No function
6: Warn indicator
7: No function
 Includes the necessary external terminal output functions as required.
The following table lists the multi-function output terminal functions.
Setting Function Description
0 No function The output terminal does not have any function.
1 Regenerate indicator
When the Power Regenerative Unit is in Regenerate status,
the contacts are in ON status.
2 Run indicator
After powering on and sending the RUN command, the Power
Regenerative Unit is in normal operation (including standby
and regenerate) and the contacts are in ON status.
3 Ready indicator
The contacts are ON when there are no Power Regenerative
Unit errors or warnings. (When the phase lock is completed,
you can now send the RUN command.)
4 Error indicator
The contacts are ON when the Power Regenerative Unit
detects an error.
5 No function The output terminal does not have any function