Delta REG2000 Series, Руководство пользователя

Страница: 78 / 128

06 Summary of Parameter Settings | REG2000
6-3
Parameter
codes
Parameter names Setting range Default
00-21 Fault record 2 3: ocn over-current during regeneration 0
00-22 Fault record 3 6: ocs over-current at stop 0
00-23 Fault record 4 9: ovn over-voltage during regeneration 0
00-24 Fault record 5 10: ovs over-voltage at stop 0
00-25 Fault record 6 15: OrP phase loss in output 0
16: oH1 power module overheated
17: oH2 internal ambient temperature overheated
(air outlet)
18: tHo1 power module overheated protection
circuit error
19: tHo2 internal ambient temperature overheated
protection circuit error
21: oL overload
30: cF1 memory writing error
31: cF2 memory read error
37: Hd1 current detection error when powering on
38: Hd2 voltage detection error when powering on
42: 5VF 5 V control board error (firmware v.1.02
(included) and later)
43: RYF relay error (firmware v.1.02 (included) and
later)
49: EF external signal input fault
52: Pcod wrong password
54: cE1 communication error
55: cE2 communication error
56: cE3 communication error
57: cE4 communication error
58: cE10 communication time-out
66: PLE phase lock error
00-26 Low word in electricity bill Read Only
00-27 High word in electricity bill Read Only
00-28
Display input AC voltage
(V
AC
)
Read Only