Dell XPS M2010 Скачать руководство пользователя страница 108

Страница: 108 / 131

Ensure that the cables for the microphone and keyboard are not underneath the system board.

Replace the four M2.5 x 5-mm screws marked with white arrows on the system board.

Replace the USB/audio port board:

Insert the USB/audio port board at an angle and push down on the black connector to snap the board into place.

Attach the USB/audio port board to the system board with four M2.5 x 5-mm screws.

Connect the USB/audio cable to the connector on system board (JAUDIO).

Connect the cable for the internal card with Bluetooth wireless technology to the connector on the system board (JBT).

Connect the subwoofer cable to the connector on the system board (JWOFR).

Connect the keyboard cable to the connector on the system board (JKBDK). Place the flat cable in the connector, then close the connector.

Connect the microphone cable to the connector on the system board (JMIC).

Replace the modem (see

Replacing the Modem

Thread the solenoid and video cables through the opening in the computer base.

10.

Seat the computer base onto the hinge arms, aligning the screw holes in the computer base with those in the hinge arms.

11.

Connect the solenoid cable to the solenoid card.

12.

Replace the frame (see

Replacing the Frame

13.

Replace the processor thermal-cooling assembly (see

Replacing the Processor Thermal-Cooling Assembly

14.

Replace the video card/thermal-cooling assembly and connect the video cable to the video card (see

Replacing the Video Card/Thermal-Cooling

Assembly

15.

Replace the system fans (see

Replacing a System Fan

16.

Replace the hard drive(s) (see

Replacing a Hard Drive

17.

Replace the top cover (see

Replacing the Top Cover

18.

Replace the cosmetic covers (see

Replacing the Cosmetic Covers

19.

Firmly attach the keyboard to the computer and close the display (see

Closing the Display

20.

Turn the computer upside down.

21.

Replace the coin cell battery (see

Replacing the Coin-Cell Battery

22.

Connect the cables to the system board connectors for the speaker (JSPK), suspend and solenoid function (JHING), and infrared (JCIR).

23.

Replace the mini card antenna cables and card (see

Replacing a Mini Card

24.

Replace the memory module(s) and cover (see

Replacing the Memory Module

25.

Replace the system battery (see

Replacing the System Battery

26.

Turn the computer over and open the display (see

Opening the Display

27.

Detach the keyboard by grasping the sides of the keyboard and pulling it straight out from the computer base.

28.

Turn on the computer.

NOTICE:

To avoid damage to the keyboard, ensure that you attach the keyboard securely before moving the computer.

NOTICE:

Before turning on the computer, ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the

computer.

Содержание XPS M2010




































































































































Результаты поиска

Содержание XPS M2010

Отзывы:

Похожие инструкции для XPS M2010

Бренды по названию

Популярные бренды

Dell XPS M2010, Руководство по обслуживанию

Результаты поиска

Содержание XPS M2010

Отзывы:

Похожие инструкции для XPS M2010

Бренды по названию

Популярные бренды