Dell XPS M2010 Скачать руководство пользователя страница 105

Страница: 105 / 131

11.

Remove the hard drive(s) (see

Removing a Hard Drive

12.

Remove the system fans (see

Removing a System Fan

13.

Remove the video card/thermal-cooling assembly (see

Removing the Video Card/Thermal-Cooling Assembly

14.

Remove the processor thermal-cooling assembly (see

Removing the Processor Thermal-Cooling Assembly

15.

Disconnect the solenoid cable on the solenoid card.

16.

Remove the six M2.5 x 8-mm screws that attach the left and right hinge arms to the computer base.

17.

Lift the computer base and carefully thread the solenoid and video cables through the opening in the bottom of the computer base. These cables are
attached to the right hinge arm.

18.

Remove the hinge arms and display from the computer base and set the display aside.

system board

solenoid cable

solenoid card

system board

M2.5 x 8-mm screws (6)

hinge arms (2)

Содержание XPS M2010




































































































































Результаты поиска

Содержание XPS M2010

Отзывы:

Dell XPS M2010, Руководство по обслуживанию, Страница: 105 / 131

Результаты поиска

Содержание XPS M2010

Отзывы: