Dell S5830DN Скачать руководство пользователя

Страница: 183 / 232

Reinstall missing or unresponsive imaging unit [31.xy]

Try one or more of the following:

•

Check if the imaging unit is missing. If missing, install the imaging unit.

For information on installing the imaging unit, see the “Replacing supplies” section of the

User’s Guide

•

If the imaging unit is installed, then remove the unresponsive imaging unit, and then reinstall it.

Note:

If the message appears after reinstalling the supply, then the imaging unit is defective.

Replace the imaging unit.

Remove defective disk [61]

Remove and replace the defective printer hard disk.

Remove packaging material, [area name]

Remove any remaining packaging material from the speciﬁed location.

Remove paper from all bins

Remove paper from all bins to clear the message and continue printing.

Note:

If removing the paper does not clear the message, then select

Continue

on the printer control

panel.

Remove paper from bin [x]

Remove paper from the speciﬁed bin to clear the message and continue printing.

Note:

If removing the paper does not clear the message, then select

Continue

on the printer control

panel.

Remove paper from [linked set bin name]

Remove paper from the speciﬁed bin to clear the message and continue printing.

If removing the paper does not clear the message, then select

Continue

on the printer control panel.

Remove paper from standard output bin

Remove the paper stack from the standard bin.

Replace cartridge, 0 estimated pages remain [88.xy]

Replace the toner cartridge to clear the message and continue printing. For more information, see the
instruction sheet that came with the supply or see the “Replacing supplies” section of the

User’s Guide

Note:

If you do not have a replacement cartridge, then see the “Ordering supplies” section of the

User’s

Guide

or visit our Web site.

Troubleshooting

183

Содержание S5830DN









































































































































































































































Результаты поиска

Содержание S5830DN

Отзывы:

Похожие инструкции для S5830DN

Бренды по названию

Популярные бренды

Dell S5830DN, Руководство пользователя

Результаты поиска

Содержание S5830DN

Отзывы:

Похожие инструкции для S5830DN

Бренды по названию

Популярные бренды