Back to Contents Page
Using System Setup: Dell™ OptiPlex™ GX100 System User's Guide
Overview
Each time you turn on your computer system or press the reset button, the system compares the hardware installed in the system to the hardware
listed in the system configuration information stored in nonvolatile random-access memory (NVRAM) on the system board. If the system detects a
discrepancy, it generates error messages that identify the incorrect configuration settings. The system then prompts you to
enter System Setup
to
correct the setting.
You can use System Setup as follows:
l
To change the system configuration information after you add, change, or remove any hardware in your system
l
To set or change user-selectable options
—
for example, the time or date on your system
You can view the current settings at any time. When you change a setting, in many cases you must reboot the system before the change takes
effect.
After you set up your system, run System Setup to familiarize yourself with your system configuration information and optional settings. Dell
recommends that you print the System Setup screens (by pressing the <Print Screen> key) or record the information for future reference.
Before you use System Setup, you need to know the kind of diskette drive(s) and hard-disk drive(s) installed in your computer. If you are unsure of
this information, see the Manufacturing Test Report that was shipped with your system and is located in the
Dell Accessories
folder.
Entering System Setup
To enter System Setup, perform the following steps:
1. Turn on your system.
If your system is already on, shut it down and then turn it on again.
2. When the
Press <F2> to Enter Setup
prompt appears in the upper-right corner of the screen, press <F2>.
If you wait too long and your operating system begins to load into memory,
let the operating system finish loading
; then shut down the system and
try again.
System Setup Screen
The
System Setup
screen displays the current setup and configuration information and optional settings for your system. Information on the
System Setup
screen is organized in four areas:
l
Title
—
The box at the top of all screens lists the system name.
l
System data
—
The two boxes below the title box display your system processor, level 2 (L2) cache, service tag, and the version number of
the basic input/output system (BIOS).
l
Options
—
The main area of the screen is a scrollable window containing options that define the installed hardware in your computer and the
power conservation and security features for your computer.
Fields next to the options contain settings or values. You can change those values that appear bright on the screen. Options or values that
you cannot change (because they are determined or calculated by the computer) appear less bright.
l
Key functions
—
The line of boxes across the bottom of all screens lists keys and their functions within System Setup.
Overview
System Setup Screen
Entering System Setup
System Setup Navigation Keys
NOTE: You can change many of the same settings through the Desktop Management Interface (DMI) client by using the optional
Dell
OpenManage™ IT Assistant
.
NOTE: To ensure an orderly system shutdown, use the shutdown option from the
Start
menu for any Microsoft
®
operating system. For
other operating systems, see the documentation that accompanied the operating system.
Содержание OptiPlex GX100
Страница 64: ...Back to Contents Page ...
