manualshive.com logo in svg

Dell Inspiron 531, Руководство пользователя

Поделиться
Скачать
Dell Inspiron 531 Скачать руководство пользователя страница 40

40

Setting Up and Using Your Computer

 

CAUTION: 

There are many different settings in the Power Options, Advanced 

Settings dialog box. Use care when making setting changes.

Click 

Start

 

 

and then click 

Help and Support

 to explore the capabilities of 

the advanced settings.

Enabling Cool ’n’ Quiet Technology

Cool 'n' Quiet

™

 technology controls your computer's processor performance 

automatically, dynamically adjusting the operating frequency and voltage, 
according to the task at hand. When an application does not require full 
performance, significant amounts of power can be saved. Performance is 
designed to still be responsive, with maximum processor performance being 
delivered when required, and automatic power savings when possible.

Windows

®

 XP:

1

Enter system setup (see "System Setup" on page 172). 

2

Select 

Cool and Quiet

 from the 

Power Management

 group, and change 

the setting to 

On

.

3

Click on the 

Start  Settings  Control Panel  Power Options

 to access 

the 

Power Options Properties

 window.

4

From the 

Power Schemes

 tab, click the Power Schemes drop-down menu 

and select 

Minimal Power Management

 and then click 

OK

.

Cool ’n’ Quiet

 technology is now enabled.

Windows Vista

®

:

Windows Vista automatically sets AMD™ Cool 'n' Quiet technology in the 

Dell Recommended

, 

Balanced

, and 

Power Saver

 power plans. It is disabled in 

the 

High Performance

 power plan.

About RAID Configurations (For Windows Vista 
only)

This section provides an overview of the redundant array of independent 
disks (RAID) configuration you may have selected when you purchased your 
computer. Your computer supports RAID level 1. A RAID level 1 is 
recommended for users that desire a high level of data integrity.

book.book  Page 40  Friday, April 4, 2008  12:10 PM

Содержание Inspiron 531





















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды