manualshive.com logo in svg

Dell Inspiron 531, Руководство пользователя

Поделиться
Скачать
Dell Inspiron 531 Скачать руководство пользователя страница 113

Removing and Installing Parts

113

3

Remove the screw holding the card retention bracket.

4

Lift the card retention bracket and set it aside in a secure location.

5

If you are installing a new card, remove the filler bracket to create a 
card-slot opening.

6

If you are replacing a card that is already installed in the computer, remove 
the card.

If necessary, disconnect any cables connected to the card. 

•

For PCI card, grasp the card by its top corners, and ease it out of its 
connector.

•

For PCI Express card, pull the securing tab, grasp the card by its top 
corners, and then ease it out of its connector.

 

NOTE: 

The position of the card shown in the illustration is indicative and may 

vary from the original.

7

Prepare the card for installation.

See the documentation that came with the card for information on 
configuring the card, making internal connections, or otherwise 
customizing it for your computer.

 

CAUTION: 

Some network adapters automatically start the computer when they 

are connected to a network. To guard against electrical shock, laceration by 
moving fan blades, or other unexpected injuries, always unplug your computer 
from the electrical outlet before installing any cards.

8

Place the card in the connector and press down firmly. Ensure that the card 
is fully seated in the slot.

book.book  Page 113  Friday, April 4, 2008  12:10 PM

Содержание Inspiron 531





















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды