3. Butterfly riser low-profile (slot 3)
4. Low-profile PCIe expansion card (slot 4)
5. Low-profile PCIe expansion card (slot 5)
6. Low-profile PCIe expansion card (slot 6)
7. Power supply unit (PSU 1)
8. Information tag
9. Power supply unit (PSU 2)
10. LOM ethernet port (2)
11. Ethernet port (Gb1)
12. Ethernet port (Gb2)
13. USB 3.0 port (2)
14. iDRAC9 dedicated network port
15. VGA port
16. System identification button
Inside the system
NOTE:
Components that are hot swappable are marked orange and touch points on the components are marked blue.
Figure 5. Inside the system with butterfly riser
1. Drive bay 1
2. Drive bay 2
3. Fans (6)
4. Memory module
5. Processor and heatsink module 1
6. Processor and heatsink module 2
7. System board
8. LOM riser card
9. Internal PERC riser
10. Air shroud
11. Butterfly riser
Locating the information tag of your system
Your system is identified by a unique Express Service Code and Service Tag number. You can view the Express Service Code and Service
Tag by pulling out the information tag located on the rear of the system. Alternatively, the information may be on a sticker on the chassis
of the system. Alternatively, the information may be on the Mini Enterprise Service Tag (MEST) label on the chassis, on the rear of the
system. This information is used by Dell to route support calls to the appropriate personnel.
Dell EMC XC740xd2 system overview
9
