Next steps
Removing a 2.5-inch drive from a 3.5-inch drive adapter
Prerequisites
NOTE:
A 2.5-inch drive is installed in a 3.5-inch drive adapter, which is then installed in the 3.5-inch drive carrier.
Steps
1. Using a Phillips #2 screwdriver, remove the screws from the side of the 3.5-inch drive adapter.
2. Remove the 2.5-inch drive from the 3.5-inch drive adapter.
Figure 40. Removing a 2.5 inch drive from a 3.5-inch drive adapter
Next steps
Replace a 2.5-inch drive into a 3.5-inch drive adapter
Installing a 2.5-inch drive into a 3.5-inch drive adapter
Prerequisites
1. Follow the safety guidelines listed in
2.
Steps
1. Align the screw holes on the 2.5-inch drive with the screw holes on the 3.5-inch drive adapter.
2. Using a Phillips #2 screwdriver, secure the 2.5-inch drive to the 3.5-inch drive adapter.
60
Installing and removing system components
