Dell EMC Vblock Systems 350, Руководство администратора

Страница: 27 / 181

Procedure
1 Log on to the Cisco UCS Manager.
2 In the Navigation window, select the Admin tab.
3 From the Admin tab, expand All .
4 Select Timezone Management .
5 In the Work window, select the General tab.
6 In the NTP Servers area, right-click the server you want to delete and click Delete .
7 If a confirmation dialog box appears, click Yes .
8 Click Save Changes .
Related information
Adding an NTP server (see page 26)
Cisco UCS Manager GUI Configuration Guide
Adding a syslog server
When you add a syslog server, logs are sent to the server to facilitate reporting alerts and
troubleshooting. Dell EMC recommends using the syslog server to facilitate the reporting of alerts and
troubleshooting.
Before you begin
Deploy a syslog server so that it is reachable from the Cisco UCS management IP address using an IP
address.
Procedure
1 Log on to the Cisco UCS Manager.
2 From the Admin tab, select Faults, Events and Audit Log > Syslog .
3 Under File , for Admin State , click Enabled .
4 In the Level menu, click Debugging .
5 Under File , in the Level menu, click Critical .
6 In the Server 1 section, for Admin State , click Enabled .
7 In the Level menu, click Critical .
8 In the Hostname field, type the primary syslog server IP address or hostname.
9 In the Facility field, select the appropriate facility.
27 | Managing compute resources