Dell EMC Vblock Systems 350, Руководство администратора

Страница: 23 / 181

Deleting a MAC pool
Delete a MAC pool using the Cisco UCS Manager. If you delete a pool, the addresses are not reallocated
from the pool that have been assigned to vNICs or vHBAs.
Before you begin
All assigned addresses from a deleted pool remain with the vNIC or vHBA to which they are assigned
until:
•
Associated service profiles are deleted
•
vNIC or vHBA to which the address is assigned is deleted or assigned to a different pool
Procedure
1 Log on to the Cisco UCS Manager.
2 In the Navigation window, select the LAN tab.
3 Expand LAN > Pools > Organization_Name .
4 Expand the MAC Pools node.
5 Right-click the MAC pool you want to delete and select Delete .
6 If a confirmation dialog box appears, click Yes .
Related information
Adding a MAC address range (see page 22)
Cisco UCS Manager GUI Configuration Guide
Creating an IP address block in the management pool
Cisco UCS Manager reserves each block of IP addresses in the management IP pool for external access
that terminates in the CIMC on a server.
About this task
IPv4 addresses are supported on Vblock Systems and VxBlock Systems. IPv6 addresses are supported
on VxBlock Systems.
Before you begin
Configure service profiles and service profile templates to use IP addresses from the management IP
pool. Servers cannot be configured to use the management IP pool. All OOB IPv4 addresses in the
management IP pool must be in the same subnet as the IP address of the fabric interconnect. IPv6
addresses should be in the configured in-band KVM VLAN. Static IP addresses should not be assigned to
the management pool for a server or service profile.
23 | Managing compute resources