DELAIR UX11 Скачать руководство пользователя страница 87

Страница: 87 / 94

User Manual UX11

Maintenance

10.1

Replacing the propeller

Whenever the propeller is broken, or if it shows any dents, it has to be replaced.
Orderable parts:

Part Number

This part comprises

FDG-000060

3 × pairs of UX11 propellers and screws

Required tools:

• Torx T10 screwdriver (included in the standard UX11 toolkit)

Required parts:

• 2 × Screw
• 2 × Propeller

Damaged propeller blades can be replaced as follows:

Loosen the fixation screw.

Insert a new propeller blade.

Fix the propeller blade with a new fixation screw.

• The fixation screw should be tightened in a way that the blade can rotate freely.
• Every time the propeller is changed, new fixation screws should be used to ensure that

they still have some thread lock on.

Delair

676, Rue Max Planck – 31670 Toulouse-Labège, France

Tel: +33 (0) 5 82 95 44 06

| www.delair.aero

Capital: 238 110,30 € - APE: 3030Z – Intra-Community VAT number: FR90 53 09 69 781 – 530 969 781 R.C.S. Toulouse

This document is the sole property of Delair and cannot be used or reproduced without the written authorization of Delair.

Содержание UX11































































































Результаты поиска

Содержание UX11

Отзывы:

DELAIR UX11, Руководство пользователя, Страница: 87 / 94

Результаты поиска

Содержание UX11

Отзывы: