DELAIR UX11 Скачать руководство пользователя страница 51

Страница: 51 / 94

User Manual UX11

Delair strongly recommends that the maximum unbalancing difference is lower than 0.020 V.
If the maximum unbalancing difference is higher than 0.020 V after normal charging, then please

recondition the battery by putting it through multiple charge-discharge cycles (see

Cycle mode on

page 41

7.2.6

Checking battery level with the LiPo checker

A LiPo checker (battery cell checker) is provided with the charger. It can be used to verify battery (and

individual cell) charge level.
A charging cable is required to connect battery to LiPo checker (provided in transport bag):

Connect the charging cable balancer wire to the LiPo checker.

Connect the balancer battery cable to the charging cable receptacle.

Read individual cell voltage on the LiPo checker. When battery is fully charged, each cell voltage is

4.2V.

7.3 Charging the Delair Link communication module

Plug the supplied charger into Delair Link’s USB-C connector.
The charge progress indicator is displayed on the screen.

CAUTION

Use only the charger supplied with

Delair Link

(included in the standard toolkit). Do not use any other non-

approved charger.

7.4 Checking the tablet

Before leaving for the flight location, make sure that:

• the tablet is fully charged.
• the sound volume on the tablet is turned fully up.

7.5 Storing your equipment in the transport bag

Store the equipment in the transport bag:

• All the parts of the UX11
• Two batteries (up to four batteries can be carried in the transport bag)
• Tablet
•

Delair Link

and its USB charger (when applicable)

• License and insurance documents (optional, depending on local regulations)

Delair

676, Rue Max Planck – 31670 Toulouse-Labège, France

Tel: +33 (0) 5 82 95 44 06

| www.delair.aero

Capital: 238 110,30 € - APE: 3030Z – Intra-Community VAT number: FR90 53 09 69 781 – 530 969 781 R.C.S. Toulouse

This document is the sole property of Delair and cannot be used or reproduced without the written authorization of Delair.

Содержание UX11































































































Результаты поиска

Содержание UX11

Отзывы:

DELAIR UX11, Руководство пользователя, Страница: 51 / 94

Результаты поиска

Содержание UX11

Отзывы: