
User Manual UX11
3.5 Maintenance screen
3.5.1
Association
When a new UX11 aircraft will be used for the first time with the tablet, the aircraft must first be
associated to the tablet to retrieve its identification and network configuration settings.
This information will later be used when binding the aircraft with the tablet (see
) so that only this tablet can control this UX11 aircraft in flight.
1
On the home screen of the application, tap
Maintenance
.
2
Tap
Association
.
A wizard starts that will guide you through the association procedure.
3.5.2
FCC/CE Setting
Telecoms regulation standards impose restrictions on Wi-Fi frequency use, power levels, etc.
This procedure allows the user to switch the UX11 aircraft into maintenance mode and to set the
appropriate compliance setting:
• FCC
• CE.
CAUTION
This function is only to be used when a temporary radio reconfiguration is needed in order to comply with
local regulations, for instance when travelling from the USA to Europe for a survey job. Users shall comply
with local radio regulations at all times.
1
On the home screen of the application, tap
Maintenance
.
2
Tap
FCC/CE Settings
.
A wizard starts that will guide you through the procedure.
3.5.3
Firmware update
With this procedure you can update the firmware for the UX11 aircraft and the
Delair Link
module
(when the latter is used).
1
On the home screen of the application, tap
Maintenance
.
2
Tap
Firmware update
.
A wizard starts that will guide you through the procedure.
3.6 Settings screen
You can toggle the following settings:
Units
Here you can set the preferred units for speed, distance, altitude, and area.
Delair
|
676, Rue Max Planck – 31670 Toulouse-Labège, France
|
Tel: +33 (0) 5 82 95 44 06
| www.delair.aero
Capital: 238 110,30 € - APE: 3030Z – Intra-Community VAT number: FR90 53 09 69 781 – 530 969 781 R.C.S. Toulouse
This document is the sole property of Delair and cannot be used or reproduced without the written authorization of Delair.
17