User Manual UX11
Descent
When entering the landing orbit, no obstacles may be present within a 200 m (656 ft) radius of the
center of the orbit.
60 m
160 m
200 m
20°
45 m
160 m
200 m
Once the aircraft has descended to the final height (60 m; 148 ft), the required obstacle-free area has a
height of 45 m (145 ft).
Landing
Once you confirm the landing, the aircraft starts the final leg of the landing. Along the final leg of the
landing, there must be a clear area free of obstacles within 20 m (66 ft) to the left and right of the
landing direction.
In the final leg of the landing, the obstacles must stay in the orange zone shown in the vertical cross
section of the landing. The ground should be relatively flat 40 m (131 ft) before landing for the height
sensor to correctly estimate when the aircraft should flare. In addition, the landing location must be
free of obstacles and meet the minimum size indicated:
10 m
10 m
10 m
20 m
During the final leg of the landing it is possible to click the
Abort
).
To successfully abort the flight, extra clearances should be taken into account:
Delair
|
676, Rue Max Planck – 31670 Toulouse-Labège, France
|
Tel: +33 (0) 5 82 95 44 06
| www.delair.aero
Capital: 238 110,30 € - APE: 3030Z – Intra-Community VAT number: FR90 53 09 69 781 – 530 969 781 R.C.S. Toulouse
This document is the sole property of Delair and cannot be used or reproduced without the written authorization of Delair.
24