Datron PRC1099A Скачать руководство пользователя страница 3

Страница: 3 / 247

PRC1099A-MS

Revision History

Date of
Revision

Revision
Letter

Description of Changes

Pages
Affected

2/06

Changes to format, text, boards, schematics and
part lists.

All

4/08

Revised to describe new Synthesizer board.

Chapter 3
Chapter 4

5/10

Battery pack, weight, duty cycle, audio specs.
Add internal option PRC1099A-IP.

Remove reference to internal option (1099AME).

Update boards, schematics, part lists.

1-2
1-3, 6-19

Chapter 6

Chapters 3, 4, 6

6/11

Update component locations diagrams, schematics
and parts lists to the latest revisions.

Chapter 4,
Chapter 6

02/17

Updated manual format.

Eliminated Chapter 2: Installation. This information
is covered in the Operator manual.

Renamed and restructured Chapters 3 and 4.
Divided Chapter 4 into separate chapters for each
board.

Added Front Panel Assembly chapter.

Updated component locations diagrams,
schematics, and parts lists to the latest revision.

Removed references to internal battery charger.
This option is now obsolete.

All

Chapter 3, 4

Chapter 12

All

Chapter 11

Содержание PRC1099A
























































































































































































































































Результаты поиска

Содержание PRC1099A

Отзывы:

Datron PRC1099A, Техническое руководство, Страница: 3 / 247

Результаты поиска

Содержание PRC1099A

Отзывы: