Datasat RS20i, Инструкция по установке и эксплуатации

Страница: 49 / 139

RS20i Installation and Operating Guide Page 49
RS20i Installation & Operating Guide Document # 9301H52900 Ver. 1.00
3.0 How-To Procedures for Setup
This table provides a list of setup activities and provides instructions or a link to instructions elsewhere
in this manual.
Table 10. Setup Procedures
ACTIVITY INSTRUCTIONS
Assign an Input button See 4.3.4 Assign Input Buttons, page 66.
Unassign / delete an Input
button See 4.3.4 Assign Input Buttons, page 66 – select the button and
assign a “blank” input to it.
Configure power-on Input
(Startup Input) See 4.3.2 Startup Input, page 65.
Create an Input See 3.1 Example: Creating an Input, below.
For detailed information about Inputs, see 2.7 About Inputs, page
32.
Assign Channel Names and VU
meters See 4.3.8.3 Channel Names, page 86.
Set Stereo Level and Stereo
Routing See 4.3.6.3 Stereo Level and Routing, page 72.
USB Save / Restore / Load See 4.2.2 Saving and Restoring Configuration Files, page 58.
Load a personalized screen
saver See 4.2.2 Saving and Restoring Configuration Files, page 58. To
set screensaver time and mode, see 4.2 System Setup Screen,
page 55.
Set up Global Audio Delay for
an input See 4.3.6.1 Global Delay, page 70.
Set up Multiple Surround
Channels For digital cinema input, see 4.3.6.2 Extended Surround Options,
page 72.
Set up HDMI option For digital cinema input, see HDMI Options, page 76
View RS20i System information See 4.2.5 System Info, page 62.
Update RS20i software See 4.2.1 Updating Your RS20i Software, page 56.
3.1 Example: Creating an Input
Prior to creating an input, it is necessary to identify the following:
ƒ
Input source
ƒ
Input option
ƒ
EQ set up
ƒ
Output preset name
The following example describes how to create “stereo 2” input, with stereo input, global delay of 0 ms,
assignment of EQ and output preset.
1. Open the Input Setup screen by selecting “Inputs”.