Datasat RS20i, Инструкция по установке и эксплуатации

Страница: 66 / 139

RS20i Installation and Operating Guide Page 66
RS20i Installation & Operating Guide Document # 9301H52900 Ver. 1.00
drop down box. Then, touch the “to Input” box to bring up the virtual keyboard and enter a
name for the new input. Press the
Copy button to complete the process, or press Cancel to
quit.
ƒ
Rename Input – Give an existing Input a new name. Select an existing input from the
drop-down list on the right side of the screen. Touch the “To” box to bring up the virtual
keyboard and enter a new name for the input. Press the
Rename button to complete the
process, or press Cancel to quit.
Note : Renaming the input will change any references, such as the button name or the input
on Macros and Events .
ƒ
Delete Input – Select an existing Input from the drop-down list on the right side of the
screen. Press the Delete button to complete the process, or press Cancel to quit.
4.3.4 Assign Input Buttons
Setup (System) > Inputs > Assign Buttons
Figure 43. Input Button Assignments Screen
ƒ
Touch the Assign drop down list to open it, then select an input.
ƒ
Touch the Button drop down list to open it, then select a button number.
ƒ
Touch the Assign button.
The button assignment will now be listed in the Current Assignments listing in the screen above.
Additionally, the Input will now be assigned to the corresponding button location along the bottom of the
Home screen as shown in
4
Figure 44.
Note : If the input name you wish to assign to a button does not appear in the Assign drop
down list, you can add it using the Edit Inputs > Copy Input function. See 2.14 Copy Input ,
page 47.
Note : To unassign or delete a button assignment, select the button from the drop down list,
then select the blank option from the Assign drop down list, then touch Assign . The Current
Assignments listing will no longer show the button assignment.