Datasat RS20i, Инструкция по установке и эксплуатации

Страница: 96 / 139

RS20i Installation and Operating Guide Page 96
RS20i Installation & Operating Guide Document # 9301H52900 Ver. 1.00
a. Large – (default) select this option if the center speaker can handle all frequencies.
b. Small – Select small if you wish to cross the signal with the subwoofer(s). Then select
the crossover frequency and slope for the center speaker. The high-pass to the center
speaker at the crossover frequency may be disabled if desired.
c. Low Pass to Left/Right . Send the Low portion of the center channel to the left and right
front speakers.
d. Phantom Center . Use this if there is no center speaker installed. This divides the center
channel between the left and right speakers. The offset can be adjusted.
6. Return to the Bass Management Setup screen and tap on Left or Right speaker. This selects the
speaker option for both left and right front speakers:
a. Large – (default) select this option if the left and right speakers can handle all
frequencies.
b. Small – Select small if you wish to cross the signal with the subwoofer(s). Then select
the cross over frequency and slope for the left and right speakers. The high-pass to the
left and right speakers at the crossover frequency may be disabled if desired.
7. Return to the Bass Management Setup screen and tap on Left Surround or Right Surround
speaker. This selects the speaker option for both left and right surround speakers:
a. Large – (default) select this option if the left and right surround speakers can handle all
frequencies.
b. Small – Select small if you wish to cross the left and right surround channels with the
subwoofer(s). Then select the cross over frequency and slope for the left and right
surround speakers. The high-pass to the left and right speakers at the crossover
frequency may be disabled if desired.
c. Phantom Surround . Use this if there are no surround speakers installed. When selected
the left surround channel is mixed with the left speaker and the right surround is mixed
with the right front speaker. The offset level can be adjusted.
8. Skip this step if there are no rear surround speakers installed.
Return to the Bass Management Setup screen and tap on Rear Surround Left or Rear Surround
Right speaker. This selects the speaker option for both rear surround left and right speakers:
a. Large – (default) select this option if the rear surround speakers can handle all
frequencies.
b. Small – Select small if you wish to cross the rear surround left and right channels with
the subwoofer(s). Then select the cross over frequency and slope for the rear surround
speakers. The high-pass to the speakers at the crossover frequency may be disabled if
desired.
9. Return to the Bass Management Setup screen and verify the configuration. All speaker
configuration options are described in text next to the speaker. This completes the bass
management setup using one or more subwoofers.
Configuration with no subwoofers:
10. Tap on Center speaker to select one of the following options for the center speaker:
a. Large – (default) select this option if you want LFE channel mixed with the center
channel.
b. Small – Select small if you do not want LFE channel mixed with the center speaker. A
high pass is also inserted for the center channel. Select the frequency and slope for the
center speaker high pass, or disable the high pass filter.
c. Low Pass to Left/Right . Send the Low portion of the center channel to the left and right
front speakers.