Datasat RS20i, Инструкция по установке и эксплуатации

Страница: 80 / 139

RS20i Installation and Operating Guide Page 80
RS20i Installation & Operating Guide Document # 9301H52900 Ver. 1.00
4.3.7.3 Dirac Optimization
The Dirac Live setup procedure must be used to copy Dirac configuration setup files to the
RS20i before this screen becomes functional. Ignore this screen if you are not using Dirac
Live software to setup the RS20i.
Setup (System) > Inputs > Audio EQ Setup > Dirac Optimization
Figure 58. Dirac Optimization Screen
ƒ
Dirac Room Optimization Enabled/Disabled – Touching the button will toggle between
enabling and disabling the Dirac Optimization.
ƒ
Current Dirac Configuration – Displays the name of the current Dirac configuration.
ƒ
Select – Select a configuration from the list of saved configurations in the box above, then
touch the
Select button. This configuration will now become the current Dirac configuration.
ƒ
Delete – Select a configuration from the list of saved configurations in the box above, then
touch the
Delete button. The configuration will be deleted from the list and from the memory
of the RS20i.
4.3.7.4 Third Octave EQ
Selecting the Third Octave EQ button from the EQ Setup screen will bring up a screen
similar to that shown below. See the topic
4
A note about Third Octave EQ in section 2.10 for
a usage example.
Setup (System) > Inputs > Audio EQ Setup > Third Octave EQ
In the upper left-hand portion of the RTA section, the current Input and current master
volume control values are shown. In the upper right-hand portion, the current audio level
and the 0 dB reference are displayed.