Datasat RS20i, Инструкция по установке и эксплуатации

Страница: 76 / 139

RS20i Installation and Operating Guide Page 76
RS20i Installation & Operating Guide Document # 9301H52900 Ver. 1.00
Rear Surround Options
None. There will be no changes to the left rear surround (Ch7) and right rear surround (ch8)
channels.
Copy surround channels to rear surround channels. The left /right (side) surround channels
(Ch5/Ch6) will be copied to the left / right rear surround channels (Ch7 / ch8). This option can
be used to fill in the rear when playing a 5.1 DCP.
7.1DS: Route inputs 11/12 to rear surrounds. The input channels 11 / 12 are routed to the
rear surround channels (Ch7 / ch8). This option is used to play a standard 7.1DS DCP.
HI/VI Options
Mix from Screen Channels. When selected the HI (RCA) output will be created as a mix of
Left, Center and Right channels (Ch1, Ch2, and Ch3). This can be used if the DCP does not
contain a HI track.
Chan 7/8 to HI/VI. Select this option when the HI and VI-N tracks are present on the Chan 7/8
input, as in the recommended 5.1, 7.1DS or 7.1 SDDS DCP. The HI track will be sent to the HI
(RCA) output. HI will also be sent to channel 15 and VI-N to channel 16. Note that the HI/VI
tracks are constant level (will not be affected by the fader). They can be routed to different
output channels, if desired.
4.3.6.7 Decoder Setup
This screen is available for Digital 1-2, Digital 9-10, TosLink A or B, S/PDIF, and HDMI 1-4 sources
only.
Setup (System) > Inputs > Input Options > Decoder Setup
Figure 55. Decoder Setup
The RS20i accepts a DTS, DTS-HD, DTS-HDMA or Dolby Digital audio stream from a DVD, Game
Console, Satellite link or other source device. The Encoded bit stream is automatically detected and
decoded internally by the RS20i software. The decoded stream is routed to the first eight channels
internally on the RS20i.
The following digital inputs accept DTS or Dolby Digital audio streams:
ƒ
HDMI (ports 1 – 4 )