Datasat RS20i, Инструкция по установке и эксплуатации

Страница: 47 / 139

RS20i Installation and Operating Guide Page 47
RS20i Installation & Operating Guide Document # 9301H52900 Ver. 1.00
Setup (System) > Inputs > Audio EQ Setup > Edit EQs
Figure 28. Copy EQ Settings
Use the Copy EQ function, accessible from the Edit EQs menu to copy the EQ set. Select the Copy
EQ From set (select from the pulldown), then in the to EQ field , enter a new name for the EQ set, then
click the Copy button.
2.13 Final Adjustments
After setting the EQ, take another SPL level reading. If the SPL reading has changed, use the Level
control (Third Octave EQ screen) to raise or lower to the proper SPL level for each channel (see Table 9
on page
4
43).
2.14 Copy Input
When an input has been configured, you may want to copy it to the next input, as a starting point, to save
time in configuring the next input. For details, see
4
Edit Inputs, page
4
65.