Datasat RS20i, Инструкция по установке и эксплуатации

Страница: 107 / 139

RS20i Installation and Operating Guide Page 107
RS20i Installation & Operating Guide Document # 9301H52900 Ver. 1.00
2. Check for a Connection to the Local Area Network (LAN)
Find another network device on the same LAN. This could be a D-Cinema server, digital projector
or laptop. The IP address of these devices must be in the same subnet; so the first 3 groups of
numbers will be the same and the 4th (last) number group must be different.
E.g. all devices on the same LAN will have 192.168.0.XX addresses (The XX will be different for
each device).
Go to Setup (System)…Network….Net Diag and enter the IP address of the other network device in
the <Select address> box. Press Ping Test and see the message. ‘OK’ means the RS20i is connected
to the same network.
‘Fail’ means that the network connection to the other device is not correct.
ƒ
Check that the network cables are plugged into the equipment (RS20i, Projector, Server etc).