Datasat RS20i, Инструкция по установке и эксплуатации

Страница: 35 / 139

RS20i Installation and Operating Guide Page 35
RS20i Installation & Operating Guide Document # 9301H52900 Ver. 1.00
ƒ
Channel Names.
ƒ
Crossover: Channel Routing and crossover points are assignable in the Routing/Crossovers
menu.
ƒ
Bass Management
Audio EQ:
ƒ
Dirac: Enabled or disabled depending on setup and calibration
ƒ
Third Octave EQ: Calibrated adjustment made by qualified installer
ƒ
Parametric Equalization: Calibrated adjustment made by qualified installer
2.8 Factory Presets
The RS20i factory settings include inputs for Digital Cinema and Stereo as described in the table below.
Table 4. RS20i Factory Presets
Input
Name Assigned
Button Signal Source EQ Set Output
Preset
HDMI 1 1 HDMI Port 1 EQ1 7.1
HDMI 2 2 HDMI Port 2 EQ1 7.1
Digital 1 3 Digital Ch: 1-8 EQ1 7.1
TOS A 4 TosLink A EQ1 7.1
SPDIF 5 S/PDIF Coax EQ1 7.1
Analog 6 Analog 8Chan EQ1 7.1
Stereo 1 7 Stereo1 L/R EQ1 7.1
The default EQ set is named EQ1 and includes all EQ settings flat and all filters off. This EQ set may be
used and altered during the theater setup process. The default output preset is 7.1, which includes the
default 8 channel assignments and trim values flat.
2.8.1 Preset Inputs
The default inputs appear in the Input Setup screen under the pull down menu for Current Input.
To create an input with the same name and source not shown in the table, go to the <Edit Inputs> button
on the upper right of this same menu. Any existing input can be copied to a new input. Any of the input
settings may be changed after the input is copied from another. You can also rename or delete existing
inputs.